Punchcard from DesignaKnit

If you use DesignaKnit, you can create/edit/copy stitch patterns for your punchcard machine. Use the "Stitch Pattern Template" print format. (This format is only available if you've assigned a punchcard machine in >Options >Method of Knitting)

DesignaKnit will produce a full-size, to-scale" template for you to print. You can then punch your card according to the template.

Below are some tips for getting this right.

0 0 0 0 0 0

Print out the template in DesignaKnit

Align and tape the blank card OVER the template. Tape both to a window to be able to see the marks on the printed page through the blank card.

Use a pencil or marker to mark the holes.

Remove the printed version and follow your marks, to punch your card.

Confirm the design by laying the completed card over the printed version. Correct any errors by adding holes, or using small bits of clear tape (on both sides) to close a mis-punched hole.

Be sure to add 2 overlapping rows on each end of the design. Every hole is punched for these rows, allowing the card to be joined without interrupting the stitch pattern.

Get knitting!

Classroom: Punchcards

Punchcard Overview

Where to Start Knitting?

Which Card is Which?

Sources for Stitch Pattern Designs

Design your Own Stitch Patterns

Vintage Accessory

LIVE@KnititNow Replays

Punchcard from DesignaKnit